Difference between revisions of "HV Transformer"

From Industrial-Craft-Wiki
Jump to navigation Jump to search
(The previous author must have been a 12 year old.)
(Redirect to new page (plus a lot of this is inaccurate))
 
(22 intermediate revisions by 11 users not shown)
Line 1: Line 1:
{{Block
#REDIRECT [[Transformer#HV-Transformer]]
|type=Wiring
|gravity=No
|dirt=No
|transparent=No
|light=No
|stackable=Yes (64)
|maxeu=2048
}}
 
The '''HV Transformer''' is used to convert '''High Voltage''' (512 EU/t) into '''Extreme Voltage''' (2048 EU/t) and back.  The HV Transformer is one step up from the [[MV Transformer]] and will take incoming packets [[EU]] packets up to 512 in size and convert them into larger packets up to 2048 in size.
 
A Redstone signal may be applied to reverse the conversion, thereby emitting 2048 [[EUP]] from the output face (the 3-dotted one), and accepting 512 EUP or lower from the input faces.
 
The HV Transformer can handle a maximum of one conversion per tick, limiting the maximum transfer to 2048 EU/t in either mode.
 
The voltage conversion is lossless which makes choosing the proper wiring for the interfaces easy.  The Extreme Voltage I/O can only be handled by [[HV Cable]].  The High Voltage I/O face is safe to connect to [[Glass Fibre Cable]], [[Splitter Cable]], [[Detector Cable]], and [[HV Cable]] only. 
 
Note that since HV Cable suffers from high resistance losses, HV Transformers should be placed to close to whatever is using/producing the Extreme Voltage to minimize this loss.
 
== Recipe ==
 
{{Grid/Crafting Table
|B1=4xIns. HV Cable
|A2=Electronic Circuit|B2=MV Transformer|C2=Energy Crystal
|B3=4xIns. HV Cable
|Output=HV Transformer
}}
 
{{Energy|Input=512 or 2048|Output=512 or 2048|Storage=-}}
 
{{Navigation}}
 
[[Category:Wiring]]

Latest revision as of 09:41, 10 December 2016

Redirect to:



Retrieved from "https://wiki.industrial-craft.net/index.php?title=HV_Transformer&oldid=19136"