MV Transformer

From Industrial-Craft-Wiki
Revision as of 14:42, 25 March 2013 by Epic Lulz (talk | contribs)
Jump to navigation Jump to search
MV Transformer
Picture na.png
Grid MV Transformer.png
Properties
Type Transformer
Tool Grid Wrench.png




Stackable Yes (64)





Energy Consumption
Max EU Input 512 EU/t (HV)
Technical Details
UU Cost {{{uu_cost}}}
First appearance ?
ID IC2:{{{id}}}


MV Transformers (MVT) are mainly used for converting High Voltage (512 EU/p) into Medium Voltage (128 EU/p) and vice versa.

Unlike Real Life™, there is no actual "voltage" in IC². EU travels in "packets" through wires with near-infinite speed and has smart pathfinding (somewhat like RP2 pneumatic tubes). Packets are measured in size (in EU/p) and volume (EU). (Size being the amount of energy it contains as it leaves a storage unit, volume being how much energy is left in each packet after inefficient cable usage).

An MVT operates in the following ways:

  • If redstone power is not applied, 512 EU in packets of up to 512 EU/p is converted into up to four packets of 128 EU/p. All conversions are limited to one per tick. (Converting 512 EU into 4x128 EU is considered one conversion.)
  • If redstone power is applied, 512 EU in packets of up to 512 EU/p is converted into one packet of 512 EU/p. All conversions are limited to one per tick.

Latest Recipe[edit]



Grid 2xIns. Gold Cable.png
Grid Machine.png
Grid 2xIns. Gold Cable.png



Grid MV Transformer.png



Usage[edit]

When using any Transformer, remember that the 3-dotted side means higher voltage and the 1-dotted sides mean lower voltage. You can change the direction the 3-dotted side is facing by right-clicking a 1-dotted face with a Wrench.

Converting to MV:[edit]

In order to convert to MV, you must point the input cable (maximum "voltage" is HV, 512 EU/p) to the 3-dotted side and then link any number of output cables from the 1-dotted side. Remember to use input cables that can withstand the packets you are sending in and Gold Cable, HV Cable or Glass Fibre Cable for the output.

Converting to HV:[edit]

In order to convert to HV, you must apply redstone power through a lever, a repeater or a redstone wire, point the input cables (maximum "voltage" is HV, 512 EU/p) to any 1-dotted side and then link the output cable from the 3-dotted side. Remember to use input cables that can withstand the packets you are sending in and HV Cable or Glass Fibre Cable for the output.

Energy[edit]

EU
Input 512 EU in up to 512 EU/p
Output Variable
  • Up to four 128 EU/p if redstone is not applied, per tick
  • One 512 EU/p if redstone is applied, per tick
Storage 512 EU

History[edit]

IC² Minecraft Change
Industrial Craft²
1.97 1.2.5 Before this version, the recipe of the MV Transformer was:



Grid Insulated Copper Cable.png
Grid Machine.png
Grid Insulated Copper Cable.png



Grid MV Transformer.png