HV Transformer

From Industrial-Craft-Wiki
Jump to navigation Jump to search
HV Transformer
HV Transformer ig.png
Grid HV Transformer.png
Properties
Type Transformer
Tool Grid Wrench.png




Stackable Yes (64)





Energy Consumption
Max EU Input 2048 EU/t (EV)
Technical Details
UU Cost {{{uu_cost}}}
First appearance ?
ID IC2:{{{id}}}


Unlike Real Life™, there is no actual "voltage" in IC². EU travels in "packets" through wires with near-infinite speed and has smart pathfinding (somewhat like RP2 pneumatic tubes). Packets are measured in size (in EU/p) and volume (EU). (Size being the amount of energy it contains as it leaves a storage unit, volume being how much energy is left in each packet after inefficient cable usage).

Transformers have two modes - "step up" and "step down". By default, the transformer will be in step up mode when it receives a redstone signal, and step down mode otherwise. This can be changed in the GUI.

With default settings a HVT (or High Voltage Transformer) operates in two different ways.

  • If redstone power is not applied, it consumes 2048 EU in any packet size and converts them into up to four 512 EU/p. All conversions are limited to one per tick. (Converting 2048 EU into 4x512 EU is considered one conversion.)
  • If redstone power is applied, it consumes 2048 EU in any packet size and converts them into one 2048 EU/p. All conversions are limited to one per tick.

Converting to HV[edit]

In order to convert to HV, you must point the input cable (any "voltage") to the 3-dotted side and then link any number of output cables from the 1-dotted side. Remember to use input cables that can withstand the packets you are sending in and HV Cable or Glass Fibre Cable for the output.

Converting to EV[edit]

In order to convert to EV, you must apply redstone power through a lever, a repeater or a redstone wire, point the input cables (any "voltage") to any 1-dotted side and then link the output cable from the 3-dotted side. Remember to use input cables that can withstand the packets you are sending in and HV Cable for the output.

Recipe[edit]

Experimental-Only Content: This information has been updated to the V2.X version of IC².
The most recent version of IC² is V2.8.<html>.


Grid Electronic Circuit.png


Grid 2xIns. Gold Cable.png
Grid MV Transformer.png
Grid 2xIns. Gold Cable.png


Grid Advanced RE-Battery.png


Grid HV Transformer.png


See: Crafting Guide

Energy[edit]

EU
Input 2048 EU
Output Variable
  • Up to 2048 EU in 512 EU/p when redstone is not applied.
  • 1 packet of 2048 EU/p when redstone is applied.
Storage 2048

Usage[edit]


Grid Advanced Circuit.png


Grid 4xIns. HV Cable.png
Grid HV Transformer.png
Grid 4xIns. HV Cable.png


Grid Energy Crystal.png


Grid EV Transformer.png


History (IC²)[edit]

IC² Minecraft Change
Industrial Craft²
2.0 1.6.4 Before this version of IC², the HV Transformer was crafted using this recipe:


Grid Electronic Circuit.png


Grid 4xIns. HV Cable.png
Grid MV Transformer.png
Grid 4xIns. HV Cable.png


Grid Energy Crystal.png


Grid HV Transformer.png

Other usages[edit]

Multiple HVT may be directly installed on a Nuclear Reactor if the reactor outputs more than 2048 EU/t as conventional wires (HV cables) cannot handle packet sizes over 2048 EU/p.