Nuclear reactor component
Components can be categorized according to their purpose.
The prime power production device of a reactor; you typically won't be generating any power without one of these. The currently functioning fuel rods (lithium doesn't count) all come in single, dual, and quad varieties.
|Uranium fuel rod
First nuclear material available.
Lifetime: 20,000 reactor ticks (5h 33m 20s continuous operation).
| Fuel Rod (Uranium)|
Dual Fuel Rod (Uranium)
Quad Fuel Rod (Uranium)
|Depleted uranium fuel rod
The result of using up all 20K reactor-ticks of fuel in a uranium fuel rod.
No energy or heat output; reprocess for valuable plutonium.
| Fuel Rod (Depleted Uranium)|
Dual Fuel Rod (Depleted Uranium)
Quad Fuel Rod (Depleted Uranium)
|MOX fuel rod
Combination of uranium and plutonium.
Lifetime: 10,000 reactor ticks (2h 46m 40s continuous operation).
Increased power output with increased reactor heat (in the fluid reactor, just a flat 2x at >50% base reactor heat).
| Fuel Rod (MOX)|
Dual Fuel Rod (MOX)
Quad Fuel Rod (MOX)
|Depleted MOX fuel rod
The result of using up all 10K reactor-ticks of fuel in a MOX fuel rod.
No energy or heat output; reprocess for the plutonium used to craft, plus a bit extra.
| Fuel Rod (Depleted MOX)|
Dual Fuel Rod (Depleted MOX)
Quad Fuel Rod (Depleted MOX)
A special component to make fuel rods more efficient (producing more energy and heat) in the absence of other fuel rods. Every neutron pulse that hits a reflector will be returned to the rod that created it.
For each reflected neutron pulse, the Neutron Reflector and Thick Neutron Reflector will lose 1 durability, having 30K and 120K respectively. The Iridium Neutron Reflector, on the other hand, is indestructible no matter how many neutron pulses it reflects - and is appropriately expensive to craft.
The prime method of dumping waste heat into the environs (in the basic reactor) or into your coolant for power generation (in the fluid reactor). Vents can remove heat from themselves (self) or the reactor hull (hull), and have a maximum heat amount they can absorb (max heat) before melting. Note that vents do not automatically absorb heat from adjacent components (other than fuel rods) just from being next to them; it must be transferred to them somehow. (Reactor and Overclocked vents can absorb reactor hull heat regardless of where they are placed, though.)
|Vent Type||Self||Hull||Max Heat|
|Advanced Heat Vent||12||0||1000|
|Reactor Heat Vent||5||5||1000|
|Overclocked Heat Vent||20||36||1000|
There is also a unique heat vent: the Component Heat Vent, which does not absorb heat at all (making it indestructible, unless your reactor explodes and vaporizes it) but instead cools down any adjacent component by 4 heat, providing a maximum of 16 total cooling if surrounded on all sides.
The prime method of moving heat around between components. Heat exchangers have a significantly higher ability to absorb heat than heat vents, and attempt to intelligently balance heat on a percentage-of-max-heat basis; if a basic Heat Exchanger (2500 capacity) has 1250 heat to deal with and only the reactor hull (base 10K capacity) to share it with, it will attempt to move heat until it has 250 (10%) and the reactor hull has 1000 (10%). Naturally, as heat continues to move around and is dissipated, percentages change, and so heat exchangers are constantly making adjustments, depending on their rate of transfer to adjacent components (near) and with the reactor hull (hull), as well as their maximum heat capacity (max heat).
Remember, heat exchangers cannot actually dissipate heat. You will need some other method for that.
|Vent Type||Near||Hull||Max Heat|
|Advanced Heat Exchanger||24||8||10000|
|Reactor Heat Exchanger||0||72||5000|
|Component Heat Exchanger||36||0||5000|
Coolant cells store a large amount of heat, compared to heat vents, but they have no inherent self-cooling, requiring the use of heat exchangers to remove their accumulated heat (and vents to dissipate it). A 'damaged' (partially heated) coolant cell cannot be placed in a fluid reactor, unlike vents or exchangers; it must be placed in a basic ('EU mode') reactor and cooled that way.
Similar to coolant cells, condensators can handle a large amount of heat. However, they destroy it instantly, reducing their own durability instead - and making them ineffective in a fluid reactor, since the heat is eliminated completely instead of transferred to the coolant.
Condensators can only be repaired through the use of Redstone or Lapis Lazuli, and so their use in a reactor setup makes it a Single Use Coolant or SUC type.
|RSH-Condensator||20,000|| Redstone in crafting grid: 10K|
Block of Redstone via Reactor Coolant Injector (RSH): 17-20K
|LZH-Condensator||100,000|| Redstone in crafting grid: 5K|
Lapis Lazuli in crafting grid: 40K
Lapis Lazuli Block via Reactor Coolant Injector (LZH): 85-100K