Difference between revisions of "MV Transformer"

From Industrial-Craft-Wiki
Jump to navigation Jump to search
(new power system)
Line 11: Line 11:
}}
}}


MV Transformers (MVT) are mainly used for converting High Voltage (512 EU/p) into Medium Voltage (128 EU/p) and vice versa.
MV Transformers are used to limit energy flow to 128 EU/t.


Unlike Real Life™, there is no actual "voltage" in IC². EU travels in "packets" through wires with near-infinite speed and has smart pathfinding (somewhat like RP2 pneumatic tubes). Packets are measured in size (in EU/p) and volume (EU). (Size being the amount of energy it contains as it leaves a storage unit, volume being how much energy is left in each packet after inefficient cable usage).
A transformer has two modes - step-up and step-down mode. By default, the transformer will operate in step-down mode unless it is receiving a redstone signal. This can be changed in the GUI.


An MVT operates in the following ways:
In step-down mode, the transformer will accept up to 512 EU/t from the 5-dotted side without exploding, and output 128 EU/t from the 3-dotted sides.
 
Step-up mode appears to be useless.
* If redstone power is '''not''' applied, 512 EU in packets of up to 512 EU/p is converted into up to four packets of 128 EU/p. '''All conversions are limited to one per tick. (Converting 512 EU into 4x128 EU is considered one conversion.)'''
* If redstone power is applied, 512 EU in packets of up to 512 EU/p is converted into one packet of 512 EU/p. '''All conversions are limited to one per tick.'''


== Latest Recipe ==
== Latest Recipe ==
{{Grid/Crafting Table
{{Grid/Crafting Table
|A1=|B1=2xIns. Gold Cable|C1=
|A1=|B1=Copper Cable|C1=
|A2=|B2=Machine|C2=
|A2=|B2=Basic Machine Casing|C2=
|A3=|B3=2xIns. Gold Cable|C3=
|A3=|B3=Copper Cable|C3=
|Output=MV Transformer
|Output=MV Transformer
}}
}}
<!-- Note for wiki users. As for MFE units, do NOT replace "Golden cable" by "Copper cable" in the recipes. Check in game before changing. As the 1.97, recipes for MV tech are with golden cable, for balances issues. The recipe of the old version has been transfered to the bottom. -->


== Usage ==
== Usage ==


When using any Transformer, remember that the 3-dotted side means '''higher voltage''' and the 1-dotted sides mean '''lower voltage'''. You can change the direction the 3-dotted side is facing by right-clicking a 1-dotted face with a [[Wrench]].
When using any Transformer, remember that the 5-dotted side means '''higher voltage''' and the 1-dotted sides mean '''lower voltage'''. You can change the direction the 5-dotted side is facing by right-clicking a 1-dotted face with a [[Wrench]].


=== Converting to MV: ===
=== Converting to MV: ===
In order to convert to MV, you must point the input cable (maximum "voltage" is HV, 512 EU/p) to the 3-dotted side and then link any number of output cables from the 1-dotted side. Remember to use input cables that can withstand the packets you are sending in and [[Gold Cable]], [[HV Cable]] or [[Glass Fibre Cable]] for the output.
In order to convert to MV, you must point the input cable (maximum "voltage" is HV, 512 EU/t) to the 5-dotted side and then link any number of output cables from the 1-dotted sides.
 
=== Converting to HV: ===
In order to convert to HV, you must '''apply redstone power through a lever, a repeater or a redstone wire''', point the input cables (maximum "voltage" is HV, 512 EU/p) to any 1-dotted side and then link the output cable from the 3-dotted side. Remember to use input cables that can withstand the packets you are sending in and [[HV Cable]] or [[Glass Fibre Cable]] for the output.


{{Energy
{{Energy
|Input=512 '''EU''' in up to 512 EU/p
|Input=Up to 512 EU/t in.
|Output=Variable
|Output=Variable
* Up to four 128 EU/p if redstone is '''not''' applied, per tick
* Up to 128 EU/t in step-down mode.
* One 512 EU/p if redstone is applied, per tick
* Up to 512 EU/t in step-up mode.
|Storage=512 EU}}
|Storage=512 EU}}



Revision as of 23:16, 3 November 2013

MV Transformer
Picture na.png
Grid MV Transformer.png
Properties
Type Transformer
Tool Grid Wrench.png




Stackable Yes (64)





Energy Consumption
Max EU Input 512 EU/t (HV)
Technical Details
UU Cost {{{uu_cost}}}
First appearance ?
ID IC2:{{{id}}}


MV Transformers are used to limit energy flow to 128 EU/t.

A transformer has two modes - step-up and step-down mode. By default, the transformer will operate in step-down mode unless it is receiving a redstone signal. This can be changed in the GUI.

In step-down mode, the transformer will accept up to 512 EU/t from the 5-dotted side without exploding, and output 128 EU/t from the 3-dotted sides. Step-up mode appears to be useless.

Latest Recipe[edit]



Grid Copper Cable.png
Grid Basic Machine Casing.png
Grid Copper Cable.png



Grid MV Transformer.png


Usage[edit]

When using any Transformer, remember that the 5-dotted side means higher voltage and the 1-dotted sides mean lower voltage. You can change the direction the 5-dotted side is facing by right-clicking a 1-dotted face with a Wrench.

Converting to MV:[edit]

In order to convert to MV, you must point the input cable (maximum "voltage" is HV, 512 EU/t) to the 5-dotted side and then link any number of output cables from the 1-dotted sides.

Energy[edit]

EU
Input Up to 512 EU/t in.
Output Variable
  • Up to 128 EU/t in step-down mode.
  • Up to 512 EU/t in step-up mode.
Storage 512 EU

History[edit]

IC² Minecraft Change
Industrial Craft²
1.97 1.2.5 Before this version, the recipe of the MV Transformer was:



Grid Insulated Copper Cable.png
Grid Machine.png
Grid Insulated Copper Cable.png



Grid MV Transformer.png