HV Transformer

The High Voltage Transformer is used to turn Extreme Voltage (EV) EU current into High Voltage (HV) and back. This transformation is useful for carrying EU over extreme distances without significant losses.

All energy that comes into the Transformer through all sides except the output face will power it up. The HV current is then emitted through the output face. A redstone signal must be applied to the Transformer in order to make it emit EV current.

Recipe

Usage

When using any Transformer, remember that the 3-dotted side means higher current and the 1-dotted side mean lower current. You can change the direction the 3-dotted side is facing by right-clicking a 1-dotted side with a Wrench.

Converting to HV:

In order to convert EV to HV, you must point the cable carrying EV from another HV Transformer to the 3-dotted side and then link a cable to one of the sides with a single dot. Then that cable will be carrying HV that you can link to an MFS Unit or an MV Transformer.

Converting to EV:

In order to convert HV to EV, point the cable carrying HV from an MFS Unit or an MV Transformer to one of the one-dotted sides and then link a cable that can carry EV to the 3-dotted side. Do not forget to apply redstone to the HV Transformer.