Industrial-Craft-Wiki - User contributions [en]

MFS Unit

2013-07-01T00:17:47Z

SegFaulter: fixed ''Transformer upgrade'' being as ''Transformer Upgrades'', which previously broke navigation.

{{Block
|image=MFS_Unit_ig.png
|type=Storage
|gravity=No
|dirt=No
|transparent=No
|light=no
|tool=bwrench
|stackable=Yes (64)
|maxeu=512
|storage=10 million
}}

The Multi-Functional Storage Unit, or MFSU, is a Tier 3 energy storage device. It is able to store up to 10 million [[EU]] (making it capable of powering multiple [[Teleporter|teleportations]], running a [[Mass Fabricator]], or directly storing power from most [[Nuclear Reactor]]s). It can accept up to 512 EU-Packet power, with unlimited EU/t, from its 5 input faces (the faces without dots). It can also emit a current of 512 EU/t from its output face (the face with a dot).

Like all storage units, its output face is marked by a special texture, which usually faces the player when the block is placed. The direction of the output face can be changed by right-clicking with a [[Wrench]] onto any of the input faces of the block; normally, this will point the output face towards the player, but holding Shift while clicking will point the output face in the opposite direction. Be aware that right-clicking the MFSU while pointing at its output face will dismantle it.

Wiring Tip: Do NOT use [[Tin Cable]], [[Gold Cable]], or [[Copper Cable]] on the output face, they cannot handle the 512 [[EU|EU/p]] that the MFSU's output emits. Instead use [[Glass Fibre Cable]] or [[HV Cable]].

Notice: Most machines cannot handle 512 [[EU|EU/p]] being sent to their storage, so they explode. Use a MV Transformer to transform the 512 [[EU]] into 128 [[EU|EU Packets]] (High Voltage to Medium Voltage), then use a LV Transformer to transform the 128 [[EU|EU Packets]] into 32 [[EU|EU Packets]] (Medium Voltage to Low Voltage). All Machines (including the [[BatBox]], [[MFE]], and MFSU) can handle Low Voltage [[EU|EU Packets]] without exploding. Otherwise, place 2 [[Transformer upgrade]]s in each machine.

== Recipe ==

{{Grid/Crafting Table
|A1=Lapotron Crystal|B1=Advanced Circuit|C1=Lapotron Crystal
|A2=Lapotron Crystal|B2=MFE Unit|C2=Lapotron Crystal
|A3=Lapotron Crystal|B3=Advanced Machine|C3=Lapotron Crystal
|Output=MFS Unit
}}



{{Energy
|Input=Max 512 EU-p
|Output=1 x 512 EU-p
|Storage=10 million}}

{{Navigation}}

[[Category:Wiring]]

Advanced Heat Exchanger

2013-06-12T04:26:24Z

SegFaulter: Added some info to the last sentence in first paragraph.

The Advanced Heat Exchanger operates 2 times faster than basic Heat Exchanger, and can take up to 10000 heat before melting - just as much heat as the basic single-block reactor can take before exploding.

== Statistics: ==

HP: 10000

Hull exchange rate (HER): 8

Component exchange rate (CER): 24

== Recipe: ==
To craft this extremely Hayo-ish reactor component, you will need:

4 [[Glass Fibre Cable]]

2 [[Electronic Circuit]]

2 basic [[Heat Exchanger]]

1 [[Dense Copper Plate]]
{{Grid/Crafting Table
|A1=Glass Fibre Cable|B1=Electronic Circuit|C1=Glass Fibre Cable
|A2=Heat Exchanger|B2=Dense Copper Plate|C2=Heat Exchanger
|A3=Glass Fibre Cable|B3=Electronic Circuit|C3=Glass Fibre Cable
|Output=Advanced Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor Components]]

Core Heat Exchanger

2013-06-12T04:24:09Z

SegFaulter: Edited 3rd sentence of first paragraph, to make it sound better. (both 2nd and 3rd sentences began with word ''This'')

The Core Heat Exchanger (aka Reactor Heat Exchanger) is a special heat exchanger that exchanges heat with the reactor hull at a rate of 72 heat/tick. This component can only be cooled by heat vents/exchangers that interact with adjacent heat cooling/exchanging components. Note that it can only take up to 5000 heat units before melting.

== Stats: ==

HP: 5000

Hull exchange rate (HER): 72

Component exchange rate (CER): N/A

== Recipe ==
{{Grid/Crafting Table
|A1=|B1=Dense Copper Plate|C1=
|A2=|B2=Heat Exchanger|C2=
|A3=|B3=Dense Copper Plate|C3=
|Output=Core Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor Components]]

Heat Exchanger

2013-02-10T05:45:42Z

SegFaulter: /* Stats: */ changed a word, added a phrase.

The Heat Exchanger does just what the name implies: it exchanges heat inside a Nuclear Reactor. It is the basic of all Heat Exchangers, and is used to make all other Heat Exchangers.
== Stats: ==

HP: 2500

Hull exchange rate (HER): 4

Component exchange rate (CER): 12

Due to low heat-capacity, this component will easily meltdown unless it has enough cooling. Do not place next to high heat-output components like the Uranium Cell, as it will melt fairly quickly. instead, use the [[Advanced Heat Exchanger]] for higher-temperature heat exchanging (but beware, even it may meltdown from high heat!).

== Recipe ==
{{Grid/Crafting Table
|A1=|B1=Electronic Circuit|C1=
|A2=Tin|B2=Dense Copper Plate|C2=Tin
|A3=|B3=Tin|C3=
|Output=Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor]]

Core Heat Exchanger

2013-02-10T05:43:29Z

SegFaulter: Fixed title paragraph, which contained incorrect data.

The Core Heat Exchanger (aka Reactor Heat Exchanger) is a special heat exchanger that exchanges heat with the reactor hull at a rate of 72 heat/tick. This component can only be cooled by heat vents/exchangers that interact with adjacent heat cooling/exchanging components. This exchanger can only take up to 5000 heat units before melting.

== Stats: ==

HP: 5000

Hull exchange rate (HER): 72

Component exchange rate (CER): N/A

== Recipe ==
{{Grid/Crafting Table
|A1=|B1=Dense Copper Plate|C1=
|A2=|B2=Heat Exchanger|C2=
|A3=|B3=Dense Copper Plate|C3=
|Output=Core Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor Components]]

Core Heat Exchanger

2012-11-25T22:18:18Z

SegFaulter: Fixed typo in ''Exchanger''

The Core Heat Exchanger (aka Reactor Heat Exchanger) is a special heat exchanger that exchanges heat with the reactor hull at a rate of 72 heat/tick. It does not interact with components except for the [[Heat Vent]], [[Component Heat Vent]], and the [[Advanced Heat Vent]], which vent heat from it. This component can take up to 5000 heat units before melting.

== Stats: ==

HP: 5000

Hull exchange rate (HER): 72

Component exchange rate (CER): N/A

== Recipe ==
{{Grid/Crafting Table
|A1=|B1=Dense Copper Plate|C1=
|A2=|B2=Heat Exchanger|C2=
|A3=|B3=Dense Copper Plate|C3=
|Output=Core Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor Components]]

Core Heat Exchanger

2012-11-25T22:17:10Z

SegFaulter: Major overhaul: Organized statistics, added navigation bar, cleaned up other details.

The Core Heat Exchanger (aka Reactor Heat Exchagnger) is a special heat exchanger that exchanges heat with the reactor hull at a rate of 72 heat/tick. It does not interact with components except for the [[Heat Vent]], [[Component Heat Vent]], and the [[Advanced Heat Vent]], which vent heat from it. This component can take up to 5000 heat units before melting.

== Stats: ==

HP: 5000

Hull exchange rate (HER): 72

Component exchange rate (CER): N/A

== Recipe ==
{{Grid/Crafting Table
|A1=|B1=Dense Copper Plate|C1=
|A2=|B2=Heat Exchanger|C2=
|A3=|B3=Dense Copper Plate|C3=
|Output=Core Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor Components]]

Dense Copper Plate

2012-11-25T22:09:48Z

SegFaulter: Added some Heat-exchanger recipes.

Dense copper plate is used in crafting nuclear reactor components.
There is no use outside nuclear tech currently.

== Recipe ==

{{Grid/Machine
|Type=Compressor
|Top=Copper|IA=8
|Bottom=RE Battery (Charged)
|Output=Dense Copper Plate
}}

== Usage ==

{{Grid/Crafting Table
|A1=|B1=Dense Copper Plate|C1=
|A2=Dense Copper Plate|B2=Machine|C2=Dense Copper Plate
|A3=|B3=Dense Copper Plate|C3=
|Output=Reactor Chamber
}}

{{Grid/Crafting Table
|A1=Dense Copper Plate|B1=Advanced Alloy|C1=
|A2=|B2=|C2=
|A3=|B3=|C3=
|Output=Integrated Reactor Plating
}}

{{Grid/Crafting Table
|A1=Tin|B1=30K Cooling Cell|C1=Tin
|A2=Tin|B2=Dense Copper Plate|C2=Tin
|A3=Tin|B3=30K Cooling Cell|C3=Tin
|linkB3=
|Output=60K Cooling Cell
}}

{{Grid/Crafting Table
|A1=|B1=|C1=
|A2=Uranium Cell|B2=Dense Copper Plate|C2=Uranium Cell
|A3=|B3=|C3=
|Output= Dual Uranium Cell
}}

{{Grid/Crafting Table
|A1=|B1=Dual Uranium Cell|C1=
|A2=Dense Copper Plate|B2=Dense Copper Plate|C2=Dense Copper Plate
|A3=|B3=Dual Uranium Cell|C3=
|Output= Quad Uranium Cell
}}

{{Grid/Crafting Table
|A1=|B1=Electronic Circuit|C1=
|A2=Tin|B2=Dense Copper Plate|C2=Tin
|A3=|B3=Tin|C3=
|Output=Heat Exchanger
}}

{{Grid/Crafting Table
|A1=|B1=Dense Copper Plate|C1=
|A2=|B2=Heat Exchanger|C2=
|A3=|B3=Dense Copper Plate|C3=
|Output=Core Heat Exchanger
}}

{{Grid/Crafting Table
|A1=Glass Fibre Cable|B1=Electronic Circuit|C1=Glass Fibre Cable
|A2=Heat Exchanger|B2=Dense Copper Plate|C2=Heat Exchanger
|A3=Glass Fibre Cable|B3=Electronic Circuit|C3=Glass Fibre Cable
|Output=Advanced Heat Exchanger
}}

Advanced Heat Exchanger

2012-11-25T21:58:01Z

SegFaulter: Added navigation bar, and added to Nuclear Reactor Components category.

The Advanced Heat Exchanger operates 2 times faster than basic Heat Exchanger, and can take up to 10000 heat before melting.

== Statistics: ==

HP: 10000

Hull exchange rate (HER): 8

Component exchange rate (CER): 24

== Recipe: ==
To craft this extremely Hayo-ish reactor component, you will need:

4 [[Glass Fibre Cable]]

2 [[Electronic Circuit]]

2 basic [[Heat Exchanger]]

1 [[Dense Copper Plate]]
{{Grid/Crafting Table
|A1=Glass Fibre Cable|B1=Electronic Circuit|C1=Glass Fibre Cable
|A2=Heat Exchanger|B2=Dense Copper Plate|C2=Heat Exchanger
|A3=Glass Fibre Cable|B3=Electronic Circuit|C3=Glass Fibre Cable
|Output=Advanced Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor Components]]

Heat Exchanger

2012-11-25T21:56:26Z

SegFaulter: Corrected some text/line spacing

The Heat Exchanger does just what the name implies: it exchanges heat inside a Nuclear Reactor. It is the basic of all Heat Exchangers, and is used to make all other Heat Exchangers.
== Stats: ==

HP: 2500

Hull exchange rate (HER): 4

Component exchange rate (CER): 12

Due to low heat-capacity, this component will easily meltdown unless it has enough cooling. Do not place next to high heat-output components like the Uranium Cell, as it will melt fairly quickly. instead, use the [[Advanced Heat Exchanger]] for high-heat exchanging.

== Recipe ==
{{Grid/Crafting Table
|A1=|B1=Electronic Circuit|C1=
|A2=Tin|B2=Dense Copper Plate|C2=Tin
|A3=|B3=Tin|C3=
|Output=Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor]]

Heat Exchanger

2012-11-25T21:54:42Z

SegFaulter: Organized stats and some other minor details.

The Heat Exchanger does just what the name implies: it exchanges heat inside a Nuclear Reactor. It is the basic of all Heat Exchangers, and is used to make all other Heat Exchangers.

== Stats: ==

HP: 2500

Hull exchange rate (HER): 4

Component exchange rate (CER): 12

Due to low heat-capacity, this component will easily meltdown unless it has enough cooling. Do not place next to high heat-output components like the Uranium Cell; instead, use the [[Advanced Heat Exchanger]].

== Recipe ==
{{Grid/Crafting Table
|A1=|B1=Electronic Circuit|C1=
|A2=Tin|B2=Dense Copper Plate|C2=Tin
|A3=|B3=Tin|C3=
|Output=Heat Exchanger
}}

{{Navigation}}

[[Category:Nuclear Reactor]]

Advanced Heat Exchanger

2012-11-25T21:46:32Z

SegFaulter: Major overhaul: Added recipe, organized statistics, cleaned up other details.