Industrial-Craft-Wiki - User contributions [en]

Weighted Fluid Distributor

2020-10-31T14:01:55Z

Rikagam: Creation - new item since MC 1.11.x

The '''[[Fluid Distributor]]''' and '''Weighted Fluid Distributor''' are the ''only'' ways to distribute fluids in IndustrialCraft 2. It does ''not'' require [[EU]] to operate. The Fluid Distributor has an internal storage of 1,000mB.

== Usage ==
The sides of the Weighted Fluid Distributor are color coded: blue means input while green means output. It will not automatically pull liquids from the world or from the internal tank of another block without the use of a {{Gin|Fluid Ejector Upgrade}}, but it will automatically output liquids from its internal buffer.

The Weighted Fluid Distributor has only on mode:
;Distribution
:One input face and five output faces. Fluid is distributed to valid outputs according to the order defined in the GUI: when the highest priority side is full, it shift to the next priority until all sides are full.

The facing can be changed with a [[Wrench]], just like other machines.

On the bottom side of the GUI are two slots. The left slot is for empty [[Empty Cell|Cells]] or [[Universal Fluid Cell|Universal Fluid Cells]]. The right slot is where the machine will output filled Cells/Universal Fluid Cells after they have been automatically filled. You have to grab the filled Cells/Universal Fluid Cells yourself; if you want automation, use a [[Canning Machine|Fluid/Solid Canning Machine]].

The middle part of the bottom of GUI is the internal tank, which holds 1,000mB of fluid.

The main part of the GUI is to set priority on the faces.

== Recipe ==
{{Grid/Crafting Table
|A1=Empty Cell|B1=Fluid Ejector Upgrade|C1=Empty Cell
|A2=Fluid Ejector Upgrade|B2=Machine|C2=Fluid Ejector Upgrade
|A3=Empty Cell||B3=Fluid Ejector Upgrade|C3=Empty Cell
|Output=Weighted Fluid Distributor
}}

== See Also ==
*[[Fluid Distributor]]
*[[Pump]]
*[[Fluid Regulator]]
*[[Universal Fluid Cell]]
*[[Canning Machine|Fluid/Solid Canning Machine]]

== History ==
This item exists since Builds for MC 1.11.x (see [https://bt.industrial-craft.net/view.php?id=2202 issue 0002202]).

[[Category:Fluids]]

Fluid Distributor

2020-10-31T13:48:50Z

Rikagam:

The '''Fluid Distributor''' and '''[[Weighted Fluid Distributor]]''' are the ''only'' ways to distribute fluids in IndustrialCraft 2. It does ''not'' require [[EU]] to operate. The Fluid Distributor has an internal storage of 1,000mB.

== Usage ==
The sides of the Fluid Distributor are color coded: blue means input while green means output. It will not automatically pull liquids from the world or from the internal tank of another block without the use of a {{Gin|Fluid Ejector Upgrade}}, but it will automatically output liquids from its internal buffer.

The Fluid Distributor has two modes:
;Distribution
:One input face and five output faces. Fluid is equally distributed to valid outputs: all are filled at the same time. If you need to prioritize the order, use the [[Weighted Fluid Distributor]] (included in builds for MC 1.11 - see [https://bt.industrial-craft.net/view.php?id=2202 issue 0002202]).
;Concentration
:Five input faces and one output face.

The facing can be changed with a [[Wrench]], just like other machines. By default, the machine will be in Distribution mode with the blue input facing toward the player.
To switch between modes, open the GUI. On the right, it tells you the current mode. Click the button in between "Mode:" and "distribute" (or "concentrate" if it is in Concentration mode) to switch modes.

On the left side of the GUI are two slots. The top slot is for empty [[Empty Cell|Cells]] or [[Universal Fluid Cell|Universal Fluid Cells]]. The bottom slot is where the machine will output filled Cells/Universal Fluid Cells after they have been automatically filled. You have to grab the filled Cells/Universal Fluid Cells yourself; if you want automation, use a [[Canning Machine|Fluid/Solid Canning Machine]].

The middle of the GUI is the internal tank, which holds 1,000mB of fluid.

== Recipe ==
{{Grid/Crafting Table
|A1=Fluid Ejector Upgrade|B1=Fluid Ejector Upgrade|C1=Fluid Ejector Upgrade
|A2=Fluid Ejector Upgrade|B2=Machine|C2=Fluid Ejector Upgrade
|A3=Empty Cell|B3=Empty Cell|C3=Empty Cell
|Output=Fluid Distributor
}}

== See Also ==
*[[Pump]]
*[[Fluid Regulator]]
*[[Universal Fluid Cell]]
*[[Canning Machine|Fluid/Solid Canning Machine]]

[[Category:Fluids]]

Fluid Distributor

2020-10-31T13:46:00Z

Rikagam: As mentionned in Issue 0002202, inclusion of Weighted Fluid Distributor

The '''Fluid Distributor''' is the ''only'' way to distribute fluids in IndustrialCraft 2. It does ''not'' require [[EU]] to operate. The Fluid Distributor has an internal storage of 1,000mB.

== Usage ==
The sides of the Fluid Distributor are color coded: blue means input while green means output. It will not automatically pull liquids from the world or from the internal tank of another block without the use of a {{Gin|Fluid Ejector Upgrade}}, but it will automatically output liquids from its internal buffer.

The Fluid Distributor has two modes:
;Distribution
:One input face and five output faces. Fluid is equally distributed to valid outputs: all are filled at the same time. If you need to prioritize the order, use the [[Weighted Fluid Distributor]] (included in builds for MC 1.11 - see [https://bt.industrial-craft.net/view.php?id=2202 issue 0002202]).
;Concentration
:Five input faces and one output face.

The facing can be changed with a [[Wrench]], just like other machines. By default, the machine will be in Distribution mode with the blue input facing toward the player.
To switch between modes, open the GUI. On the right, it tells you the current mode. Click the button in between "Mode:" and "distribute" (or "concentrate" if it is in Concentration mode) to switch modes.

On the left side of the GUI are two slots. The top slot is for empty [[Empty Cell|Cells]] or [[Universal Fluid Cell|Universal Fluid Cells]]. The bottom slot is where the machine will output filled Cells/Universal Fluid Cells after they have been automatically filled. You have to grab the filled Cells/Universal Fluid Cells yourself; if you want automation, use a [[Canning Machine|Fluid/Solid Canning Machine]].

The middle of the GUI is the internal tank, which holds 1,000mB of fluid.

== Recipe ==
{{Grid/Crafting Table
|A1=Fluid Ejector Upgrade|B1=Fluid Ejector Upgrade|C1=Fluid Ejector Upgrade
|A2=Fluid Ejector Upgrade|B2=Machine|C2=Fluid Ejector Upgrade
|A3=Empty Cell|B3=Empty Cell|C3=Empty Cell
|Output=Fluid Distributor
}}

== See Also ==
*[[Pump]]
*[[Fluid Regulator]]
*[[Universal Fluid Cell]]
*[[Canning Machine|Fluid/Solid Canning Machine]]

[[Category:Fluids]]