HV Transformer

2013-01-05T18:14:28Z

N8erAID: The previous author must have been a 12 year old.

{{Block
|type=Wiring
|gravity=No
|dirt=No
|transparent=No
|light=No
|stackable=Yes (64)
|maxeu=2048
}}

The '''HV Transformer''' is used to convert '''High Voltage''' (512 EU/t) into '''Extreme Voltage''' (2048 EU/t) and back. The HV Transformer is one step up from the [[MV Transformer]] and will take incoming packets [[EU]] packets up to 512 in size and convert them into larger packets up to 2048 in size.

A Redstone signal may be applied to reverse the conversion, thereby emitting 2048 [[EUP]] from the output face (the 3-dotted one), and accepting 512 EUP or lower from the input faces.

The HV Transformer can handle a maximum of one conversion per tick, limiting the maximum transfer to 2048 EU/t in either mode.

The voltage conversion is lossless which makes choosing the proper wiring for the interfaces easy. The Extreme Voltage I/O can only be handled by [[HV Cable]]. The High Voltage I/O face is safe to connect to [[Glass Fibre Cable]], [[Splitter Cable]], [[Detector Cable]], and [[HV Cable]] only.

Note that since HV Cable suffers from high resistance losses, HV Transformers should be placed to close to whatever is using/producing the Extreme Voltage to minimize this loss.

== Recipe ==

{{Grid/Crafting Table
|B1=4xIns. HV Cable
|A2=Electronic Circuit|B2=MV Transformer|C2=Energy Crystal
|B3=4xIns. HV Cable
|Output=HV Transformer
}}

{{Energy|Input=512 or 2048|Output=512 or 2048|Storage=-}}

{{Navigation}}

[[Category:Wiring]]

Industrial-Craft-Wiki - User contributions [en]

HV Transformer