Industrial-Craft-Wiki - User contributions [en]

MV Transformer

2012-01-11T19:49:06Z

Blade: /* Converting to HV: */

{{Block
|image=
|type=Wiring
|gravity=No
|dirt=No
|transparent=No
|light=no
|stackable=Yes (64)
}}

{{IC²}}

The Medium Voltage Transformer is used to turn '''High Voltage''' (HV) [[EU]] current into '''Medium Voltage''' (MV) and back. This is useful for powering advanced machines and for medium-range energy transport.

HV current must be wired into the output face (the 3-dotted one), while MV current can be wired into any otherface. By default, the Transformer outputs MV current. A Redstone signal must be applied to it in order to make it reverse flow, thereby emitting HV current from the High Voltage face (the 3-dotted one).

== Recipe ==

{{Grid/Crafting Table
|A1=|B1=Insulated Copper Cable|C1=
|A2=|B2=Machine|C2=
|A3=|B3=Insulated Copper Cable|C3=
|Output=MV Transformer
}}

== Usage ==

When using any Transformer, remember that the 3-dotted side means '''higher current''' and the 1-dotted sides mean '''lower current'''. You can change the direction the 3-dotted side is facing by right-clicking a 1-dotted face with a [[Wrench]].

=== Converting to MV: ===

In order to convert from HV to MV, you must point the [[Cable|cable]] carrying HV from a [[HV Transformer]] or [[MFS Unit]] to the 3-dotted side and then link a cable that can carry MV to one of the sides with a single dot. Then that cable will be carrying MV that you can link to advanced machines, store in a [[MFE Transmitter]] or convert to LV with an [[LV Transformer]].

=== Converting to HV: ===

In order to convert from MV to HV, point the cable carrying MV from a [[MFE Transmitter]] or a [[LV Transformer]] to one of the one-dotted sides and then link a cable that can carry HV to the 3-dotted side. '''Do not forget to apply redstone''' to the MV Transformer.

{{Energy|Input=128 or 512|Output=128 or 512|Storage=-}}

{{Navigation}}

MV Transformer

2012-01-11T19:48:44Z

Blade: /* Converting to HV: */

{{Block
|image=
|type=Wiring
|gravity=No
|dirt=No
|transparent=No
|light=no
|stackable=Yes (64)
}}

{{IC²}}

The Medium Voltage Transformer is used to turn '''High Voltage''' (HV) [[EU]] current into '''Medium Voltage''' (MV) and back. This is useful for powering advanced machines and for medium-range energy transport.

HV current must be wired into the output face (the 3-dotted one), while MV current can be wired into any otherface. By default, the Transformer outputs MV current. A Redstone signal must be applied to it in order to make it reverse flow, thereby emitting HV current from the High Voltage face (the 3-dotted one).

== Recipe ==

{{Grid/Crafting Table
|A1=|B1=Insulated Copper Cable|C1=
|A2=|B2=Machine|C2=
|A3=|B3=Insulated Copper Cable|C3=
|Output=MV Transformer
}}

== Usage ==

When using any Transformer, remember that the 3-dotted side means '''higher current''' and the 1-dotted sides mean '''lower current'''. You can change the direction the 3-dotted side is facing by right-clicking a 1-dotted face with a [[Wrench]].

=== Converting to MV: ===

In order to convert from HV to MV, you must point the [[Cable|cable]] carrying HV from a [[HV Transformer]] or [[MFS Unit]] to the 3-dotted side and then link a cable that can carry MV to one of the sides with a single dot. Then that cable will be carrying MV that you can link to advanced machines, store in a [[MFE Transmitter]] or convert to LV with an [[LV Transformer]].

=== Converting to HV: ===

In order to convert from MV to HV, point the cable carrying MV from a [[MFE Transmitter]] or a [[LV Transformer]] to one of the one-dotted sides and then link a cable that can carry HV to the 3-dotted side. '''Do not forget to apply redstone''' to the MV Transformer.

{{Energy|Input=128 to 512|Output=128 or 512|Storage=-}}

{{Navigation}}