Difference between revisions of "Liquid Heat Exchanger"

From Industrial-Craft-Wiki
Jump to navigation Jump to search
m (→‎Trivia: fixed geothermal gen producing 20k EU -> 10k EU)
m
Line 1: Line 1:
'''Liquid Heat Exchanger''' is a block[[Category:Heat Generators|Generator]] which extracts heat from specific fluids. This machine requires at least two additional [[Heat Conductor|Heat Conductors]] in order to function. As of build 694, the only two acceptable input fluids are [[Non-IC Items|Lava]] and [[Hot Coolant]].
The '''Liquid Heat Exchanger''' is a [[Category:Heat Generators|Heat Generator]] which extracts [[Heat|heat]] from fluids. This machine requires at least two additional [[Heat Conductor|Heat Conductors]] in order to function. As of build 694, the only two acceptable input fluids are [[Non-IC Items|Lava]] and [[Hot Coolant]].


==Usage==
==Usage==
When the Liquid Heat Exchanger is placed, the heat output will be facing toward the player. It is distinguishable by the orange square. Like all other [[Category:Heat Generators|Heat Generators]], the heat is sent out the output face, so a [[Category:Heat Accepting Machines|Heat Accepting Machine's]] input face connects here.


When you place a Liquid Heat Exchanger in the world, the output face will be the side closest to you. It is distinguishable by the orange square, which is actually that [[Heat Conductor]] from the crafting recipe. Like all other [[Category:Heat Generators|Heat Generators]], the heat is sent out the output face, so a [[Category:Heat Accepting Machines|Heat Accepting Machine's]] input face connects here.
Right-clicking the Liquid Heat Exchanger will open its GUI. The center of the GUI consists of ten slots for [[Heat Conductor|Heat Conductors]] At least two heat conductors are required. Each Heat Conductor increases the heat yield by 10 [[hU]]/mB, so it is ''highly recommended'' to use all 10 slots. The minimum output is therefore 20 hU/t, and the maximum is 100 hU/t. The current output is displayed at the top of the GUI.


Using (right-clicking on) the Liquid Heat Exchanger will open its GUI. The center of the GUI consists of ten slots. [[Heat Conductor|Heat Conductors]] go in here: at least two and at the most ten. Each Heat Conductor increases the heat yield per milliBucket of fluid by 10[[Heat Units|hU]], so it is ''highly recommended'' to '''use all 10 slots'''. The minimum output is therefore 20hU, and the maximum is 100hU. The current output is displayed on the top of the GUI.
On the left and right sides are two internal tanks for the input (left) and output (right) fluids. '''Each milliBucket of fluid is worth 200 * [number of Heat Conductors] hU'''. Beneath each fluid tank are two slots. The left slot is for input [[Universal Fluid Cell|cells]], and the right slot is for output cells. The input cells will be emptied into the input tank as needed and, if Universal Fluid Cells are used, the empty Universal Fluid Cell will be returned in the output cell slot under the input tank. The input slot under the output tank should be empty cells, and the output cells under the output tank will be filled with the output fluid.


On the left and right sides are two internal tanks for the input (left) and output (right) fluids. '''Each milliBucket of fluid is worth 200 * [number of Heat Conductors] hU'''. Beneath each fluid tank are two slots. The left slot is for input cells, and the right slot is for output cells. Either normal [[Category:Cell|Cells]] or [[Category:Universal Fluid Cell|Universal Fluid Cells]] may be used. The right slot is for output cells. The input cells under the input tank should be filled with valid input fluids; they will be emptied into the input tank as needed and, if Universal Fluid Cells were used, the empty Universal Fluid Cell will be returned in the output cell slot under the input tank. The input cells under the output tank should be empty cells, and the output cells under the output tank will be filled with the output fluid.
This chart summarizes the recipes which made in this machine:
{| class="wikitable"
{| class="wikitable"
|+Compatible Fluids
!Input Fluid
!Input Fluid
!Output Fluid
!Output Fluid
Line 23: Line 22:
The Liquid Heat Exchanger will only run if there is a place for the heat to go; it will not extract heat from the input fluid unless there is sufficient room for all of the heat and resulting output fluid. It is also always "on", and will produce heat whenever it can. Redstone signals do not affect the Liquid Heat Exchanger.
The Liquid Heat Exchanger will only run if there is a place for the heat to go; it will not extract heat from the input fluid unless there is sufficient room for all of the heat and resulting output fluid. It is also always "on", and will produce heat whenever it can. Redstone signals do not affect the Liquid Heat Exchanger.


==Recipe==
== Recipe ==
{{Grid/Crafting Table
{{Grid/Crafting Table
|A1=Glass|B1=Empty Cell|C1=Glass
|A1=Glass|B1=Empty Cell|C1=Glass
Line 31: Line 30:
}}
}}


==Upgrades==
== Upgrades ==
The Liquid Heat Exchanger takes [[Fluid Ejector Upgrade|Fluid Ejector Upgrades]] and [[Ejector Upgrade|Ejector Upgrades]]. The Fluid Ejector Upgrade is ''highly'' recommended, as this allows you to automatically output the [[Coolant]] or [[Pahoehoe Lava]] into a [[Fluid Distributor]]. Upgrades go into one of the three slots on the bottom-middle of the GUI.
The Liquid Heat Exchanger takes [[Fluid Ejector Upgrade|Fluid Ejector Upgrades]] and [[Ejector Upgrade|Ejector Upgrades]]. The Fluid Ejector Upgrade is ''highly'' recommended, as this allows you to automatically output the [[Coolant]] or [[Pahoehoe Lava]] into a [[Fluid Distributor]]. Upgrades go into one of the three slots on the bottom-middle of the GUI.


==Trivia==
== Trivia ==
*It uses almost 10 buckets of Lava providing heat to produce 20 [[Refined Iron]] in a [[Blast Furnace]].
*The Liquid Heat Exchanger uses almost 10 buckets of Lava providing heat to produce 20 [[Refined Iron]] in a [[Blast Furnace]].
*One bucket of [[Non-IC Items|Lava]] will produce 20,000hU. This is equal to 10,000EU using a [[Stirling Generator]]. A [[Geothermal Generator]] will produce exactly the same (10,000EU), but without [[Pahoehoe Lava]] residue.
*One bucket of Lava will produce 20,000hU. This is equal to 10,000EU using a [[Stirling Generator]]. A [[Geothermal Generator]] will produce exactly the same (10,000EU), but without [[Pahoehoe Lava]] residue.
*[[Pahoehoe Lava]] can only be made in the Liquid Heat Exchanger.
*Pahoehoe Lava can only be made in the Liquid Heat Exchanger.
*The only way to use [[Hot Coolant]] is with the Liquid Heat Exchanger to produce hU.
*The only use for [[Hot Coolant]] is in the Liquid Heat Exchanger to produce hU.
*Liquid Heat Exchangers pair well with [[Stirling Generator|Stirling Generators]].


[[Category:Heat]]
[[Category:Heat]]
[[Category:Heat Generators]]
[[Category:Heat Generators]]

Revision as of 19:07, 26 March 2017

The Liquid Heat Exchanger is a which extracts heat from fluids. This machine requires at least two additional Heat Conductors in order to function. As of build 694, the only two acceptable input fluids are Lava and Hot Coolant.

Usage[edit]

When the Liquid Heat Exchanger is placed, the heat output will be facing toward the player. It is distinguishable by the orange square. Like all other, the heat is sent out the output face, so a input face connects here.

Right-clicking the Liquid Heat Exchanger will open its GUI. The center of the GUI consists of ten slots for Heat Conductors At least two heat conductors are required. Each Heat Conductor increases the heat yield by 10 hU/mB, so it is highly recommended to use all 10 slots. The minimum output is therefore 20 hU/t, and the maximum is 100 hU/t. The current output is displayed at the top of the GUI.

On the left and right sides are two internal tanks for the input (left) and output (right) fluids. Each milliBucket of fluid is worth 200 * [number of Heat Conductors] hU. Beneath each fluid tank are two slots. The left slot is for input cells, and the right slot is for output cells. The input cells will be emptied into the input tank as needed and, if Universal Fluid Cells are used, the empty Universal Fluid Cell will be returned in the output cell slot under the input tank. The input slot under the output tank should be empty cells, and the output cells under the output tank will be filled with the output fluid.

Compatible Fluids
Input Fluid Output Fluid
Lava Pahoehoe Lava
Hot Coolant Coolant

The Liquid Heat Exchanger will only run if there is a place for the heat to go; it will not extract heat from the input fluid unless there is sufficient room for all of the heat and resulting output fluid. It is also always "on", and will produce heat whenever it can. Redstone signals do not affect the Liquid Heat Exchanger.

Recipe[edit]

Grid Glass.png
Grid Glass.png
Grid Iron Item Casing.png
Grid Empty Cell.png
Grid Empty Cell.png
Grid Heat Conductor.png
Grid Glass.png
Grid Glass.png
Grid Iron Item Casing.png
Grid Liquid Heat Exchanger.png


Upgrades[edit]

The Liquid Heat Exchanger takes Fluid Ejector Upgrades and Ejector Upgrades. The Fluid Ejector Upgrade is highly recommended, as this allows you to automatically output the Coolant or Pahoehoe Lava into a Fluid Distributor. Upgrades go into one of the three slots on the bottom-middle of the GUI.

Trivia[edit]

  • The Liquid Heat Exchanger uses almost 10 buckets of Lava providing heat to produce 20 Refined Iron in a Blast Furnace.
  • One bucket of Lava will produce 20,000hU. This is equal to 10,000EU using a Stirling Generator. A Geothermal Generator will produce exactly the same (10,000EU), but without Pahoehoe Lava residue.
  • Pahoehoe Lava can only be made in the Liquid Heat Exchanger.
  • The only use for Hot Coolant is in the Liquid Heat Exchanger to produce hU.